SEE a cell phone cover that you like on Taobao? Forget about placing an order, paying the bill online and waiting for days for it to be delivered to you. In the near future, you'll be able to get it in minutes just by hit­ting "print" on your computer.
You might find it hard to believe that you could actually "print" an object like you would a picture. But it is not that hard to under­stand how it would work. Just as a traditional printer sprays (喷) ink onto paper line by line, modern 3-D printers spread material onto a surface layer by layer, from the bottom to the top, gradually building up a shape.
Instead of ink, the materials the 3-D printer uses are mainly plastic, resin (树脂)and certain metals. The thinner each layer is --- from a millimeter to less than the width of a hair ---  the smoother and finer the object will be.
This may sound like a completely new technology, but the truth is that 3-D printing has been around since the late 1980s. Back then, it was barely affordable for most people, so few knew about it.
Last year, though, saw a big change in the 3-D printing industry--- printers became much cheaper. For example, 10 years ago a desktop 3-D printer might have cost £20,000 (200,000 yuan), while now they cost only about £ 1,000, according to the BBC.
Taken out of the factory and in­troduced to more diverse and com­mon uses, 3-D printing can create just about anything you can think of ---flutes (笛子), bikinis, jewelry, aircraft parts and even human organs. In fact, scientists from Cornell Univer­sity in New York have just made an artificial ear using a 3-D printer, accord­ing to Science Daily. The fake ear looks and acts exactly like a natural one.
However, as 3-D printing becomes more commonplace, it may bring about certain problems --- such as piracy. "Once you can download a coffee maker, or print out a new set of kitchen utensils (餐具) on your personal 3-D printer, who will visit a retail (零售的) store again?" an expert in 3-D printing told Forbes News. Even more frightening, what if anyone in the world could use a 3-D printer to print out a fully functioning gun?
【小题1】According to the article, in the future, the 3-D printing technology will ___.

See a cell phone cover that you like on Taobao? Forget about placing an order, paying the bill online and waiting for days for it to be delivered to you. In the near future, you'll be able to get it in minutes just by hitting "print" on your computer.
You might find it hard to believe that you could actually "print" an object like you would a picture. But it is not that hard to understand how it would work. Just as a traditional printer sprays (喷) ink onto paper line by line, modern 3-D printers spread material onto a surface layer by layer, from the bottom to the top, gradually building up a shape.
Instead of ink, the materials the 3-D printer uses are mainly plastic, resin (树脂)and certain metals. The thinner each layer is --- from a millimeter to less than the width of a hair ---  the smoother and finer the object will be.
This may sound like a completely new technology, but the truth is that 3-D printing has been around since the late 1980s. Back then, it was hardly affordable for most people, so few knew about it.
Last year, though, saw a big change in the 3-D printing industry--- printers became much cheaper. For example, 10 years ago a desktop 3-D printer might have cost £20,000 (200,000 yuan), while now they cost only about £ 1,000, according to the BBC.
Taken out of the factory and introduced to more diverse and common uses, 3-D printing can create just about anything you can think of ---flutes (笛子), bikinis, jewelry, aircraft parts and even human organs. In fact, scientists from Cornell University in New York have just made an artificial ear using a 3-D printer, according to Science Daily. The fake ear looks and acts exactly like a natural one.
However, as 3-D printing becomes more common, it may bring about certain problems --- such as piracy(盗版). "Once you can download a coffee maker, or print out a new set of kitchen utensils (餐具) on your personal 3-D printer, who will visit a retail (零售的) store again?" an expert in 3-D printing told Forbes News. Even more frightening, what if anyone in the world could use a 3-D printer to print out a fully functioning gun?
【小题1】According to the article, in the future, the 3-D printing technology will ___.

As a young girl, Margaret “Mattie” Knight never played with dolls, preferring to make toys for her brothers instead. In 1849, Knight went to work in a cotton factory where she witnessed a “shuttle,” a device that carries thread back and forth across a textile loom（纺布机）, fly off the machine when the thread broke, striking and killing a young boy about her own age.
The 12-year-old Knight developed a safety mechanism that made it impossible for a shuttle to leave the loom. The design was so effective, soon virtually every new power loom carried her invention, saving countless workers from injury or death. Being so young, she didn’t bother to patent the device, so she never received payment.
Knight wouldn’t make the same mistake later in life when she invented a machine that could produce flat-bottomed paper bags. Knight had built a small wooden model in her home, but she needed a metal version to show it could hold up to the stress of mass production. So she hired Charles Annan to make the full-sized machine for her, only to have him try to claim the patent for himself. When Knight sued（起诉）, Annan’s argument was that the design had to be his, because no woman could possibly understand the complex mechanics. Knight proved him wrong when she brought back her wooden prototype and explained how every part worked. She won the case in 1871, making her the second woman to hold an American patent. Over a hundred years later, her design is still used as the basis for many modern flat-bottom bag machines.
But that wasn’t the last the world heard of Mattie Knight. During her lifetime, she made about 90 inventions and received 26 patents, becoming one of the most productive female inventors of the 19th century.
【小题1】We can learn from Paragraph 1 that ________.

See a cell phone cover that you like on Taobao? Forget about placing an order, paying the bill online and waiting for days for it to be delivered to you. In the near future, you'll be able to get it in minutes just by hitting "print" on your computer.

You might find it hard to believe that you could actually "print" an object like you would a picture. But it is not that hard to understand how it would work. Just as a traditional printer sprays (喷) ink onto paper line by line, modern 3-D printers spread material onto a surface layer by layer, from the bottom to the top, gradually building up a shape.

Instead of ink, the materials the 3-D printer uses are mainly plastic, resin (树脂)and certain metals. The thinner each layer is --- from a millimeter to less than the width of a hair ---  the smoother and finer the object will be.

This may sound like a completely new technology, but the truth is that 3-D printing has been around since the late 1980s. Back then, it was hardly affordable for most people, so few knew about it.

Last year, though, saw a big change in the 3-D printing industry--- printers became much cheaper. For example, 10 years ago a desktop 3-D printer might have cost £20,000 (200,000 yuan), while now they cost only about £ 1,000, according to the BBC.

Taken out of the factory and introduced to more diverse and common uses, 3-D printing can create just about anything you can think of ---flutes (笛子), bikinis, jewelry, aircraft parts and even human organs. In fact, scientists from Cornell University in New York have just made an artificial ear using a 3-D printer, according to Science Daily. The fake ear looks and acts exactly like a natural one.

However, as 3-D printing becomes more common, it may bring about certain problems --- such as piracy(盗版). "Once you can download a coffee maker, or print out a new set of kitchen utensils (餐具) on your personal 3-D printer, who will visit a retail (零售的) store again?" an expert in 3-D printing told Forbes News. Even more frightening, what if anyone in the world could use a 3-D printer to print out a fully functioning gun?

1.According to the article, in the future, the 3-D printing technology will ___.

A．enable people to make better purchases online

B．be applied as widely in our daily lives as computers

C．change the way we make many products

D．shorten the time it takes for people to get what they buy online

2.What was the big event happening in the 3-D printing industry last year?

A．The 3-D printing technology was taken out ofthe factory.

B．The 3-D printer became more affordable forconsumers.

C．The 3-D printer was used for medical treatmentfor the first time.

D．3-D printing technology began to be used invarious fields.

3.How is the last paragraph developed?

A．By analyzing a cause and an effect.          B．By making comparisons.

C．By giving examples.                      D．By presenting research findings.

4.What is the best title of the passage?

A．Printing out everything                   B．Technology in the future

C．Online shopping disappearing              D．Great demand for 3-D printers

SEE a cell phone cover that you like on Taobao? Forget about placing an order, paying the bill online and waiting for days for it to be delivered to you. In the near future, you'll be able to get it in minutes just by hit­ting "print" on your computer.

You might find it hard to believe that you could actually "print" an object like you would a picture. But it is not that hard to under­stand how it would work. Just as a traditional printer sprays (喷) ink onto paper line by line, modern 3-D printers spread material onto a surface layer by layer, from the bottom to the top, gradually building up a shape.

Instead of ink, the materials the 3-D printer uses are mainly plastic, resin (树脂)and certain metals. The thinner each layer is --- from a millimeter to less than the width of a hair ---  the smoother and finer the object will be.

This may sound like a completely new technology, but the truth is that 3-D printing has been around since the late 1980s. Back then, it was barely affordable for most people, so few knew about it.

Last year, though, saw a big change in the 3-D printing industry--- printers became much cheaper. For example, 10 years ago a desktop 3-D printer might have cost £20,000 (200,000 yuan), while now they cost only about £ 1,000, according to the BBC.

Taken out of the factory and in­troduced to more diverse and com­mon uses, 3-D printing can create just about anything you can think of ---flutes (笛子), bikinis, jewelry, aircraft parts and even human organs. In fact, scientists from Cornell Univer­sity in New York have just made an artificial ear using a 3-D printer, accord­ing to Science Daily. The fake ear looks and acts exactly like a natural one.

However, as 3-D printing becomes more commonplace, it may bring about certain problems --- such as piracy. "Once you can download a coffee maker, or print out a new set of kitchen utensils (餐具) on your personal 3-D printer, who will visit a retail (零售的) store again?" an expert in 3-D printing told Forbes News. Even more frightening, what if anyone in the world could use a 3-D printer to print out a fully functioning gun?

1.According to the article, in the future, the 3-D printing technology will ___.

A．enable people to make better purchases online

B．be applied as widely in our daily lives as computers

C．change the way we make many products

D．shorten the time it takes for people to get what they buy online

2.What was the big event happening in the 3-D printing industry last year?

A．The 3-D printing technology was taken out ofthe factory.

B．The 3-D printer became more affordable forconsumers.

C．The 3-D printer was used for medical treatmentfor the first time.

D．3-D printing technology began to be used invarious fields.

3.How is the last paragraph developed?

A．By analyzing a cause and an effect.          B．By making comparisons.

C．By giving examples.                      D．By presenting research findings.

4.What is the best title of the passage?

A．Printing out everything                   B．Technology in the future

C．Online shopping disappearing              D．Great demand for 3-D printers