题目内容
See a cell phone cover that you like on Taobao? Forget about placing an order, paying the bill online and waiting for days for it to be delivered to you. In the near future, you'll be able to get it in minutes just by hitting "print" on your computer.
You might find it hard to believe that you could actually "print" an object like you would a picture. But it is not that hard to understand how it would work. Just as a traditional printer sprays (喷) ink onto paper line by line, modern 3-D printers spread material onto a surface layer by layer, from the bottom to the top, gradually building up a shape.
Instead of ink, the materials the 3-D printer uses are mainly plastic, resin (树脂)and certain metals. The thinner each layer is --- from a millimeter to less than the width of a hair --- the smoother and finer the object will be.
This may sound like a completely new technology, but the truth is that 3-D printing has been around since the late 1980s. Back then, it was hardly affordable for most people, so few knew about it.
Last year, though, saw a big change in the 3-D printing industry--- printers became much cheaper. For example, 10 years ago a desktop 3-D printer might have cost £20,000 (200,000 yuan), while now they cost only about £ 1,000, according to the BBC.
Taken out of the factory and introduced to more diverse and common uses, 3-D printing can create just about anything you can think of ---flutes (笛子), bikinis, jewelry, aircraft parts and even human organs. In fact, scientists from Cornell University in New York have just made an artificial ear using a 3-D printer, according to Science Daily. The fake ear looks and acts exactly like a natural one.
However, as 3-D printing becomes more common, it may bring about certain problems --- such as piracy(盗版). "Once you can download a coffee maker, or print out a new set of kitchen utensils (餐具) on your personal 3-D printer, who will visit a retail (零售的) store again?" an expert in 3-D printing told Forbes News. Even more frightening, what if anyone in the world could use a 3-D printer to print out a fully functioning gun?
【小题1】According to the article, in the future, the 3-D printing technology will ___.
| A．enable people to make better purchases online |
| B．be applied as widely in our daily lives as computers |
| C．change the way we make many products |
| D．shorten the time it takes for people to get what they buy online |
| A．The 3-D printing technology was taken out ofthe factory. |
| B．The 3-D printer became more affordable forconsumers. |
| C．The 3-D printer was used for medical treatmentfor the first time. |
| D．3-D printing technology began to be used invarious fields. |
| A．By analyzing a cause and an effect. | B．By making comparisons. |
| C．By giving examples. | D．By presenting research findings. |
| A．Printing out everything | B．Technology in the future |
| C．Online shopping disappearing | D．Great demand for 3-D printers |
【小题1】C
【小题2】B
【小题3】C
【小题4】A
解析试题分析：本文介绍了三维印刷机的情况，它通常被简称为3D印刷机，其工作原理非常简单。首先在电脑上绘制产品草图，并细化修补其形状和着色。接着按下印刷按钮，印刷机开始运作，产品慢慢成型。3D印刷术将随着技术本身的不断改进迅速铺开，使用成本急剧下降。但是本文还给出了一些担忧，万一能够印出枪支了，不就对社会的治安带来一些麻烦了。
【小题1】细节理解题。根据In the near future, you'll be able to get it in minutes just by hitting "print" on your computer.改变了我们制造产品的方式,故选C
【小题2】细节理解题。根据Last year, though, saw a big change in the 3-D printing industry--- printers became much cheaper. For example, 10 years ago a desktop 3-D printer might have cost £20,000 (200,000 yuan), while now they cost only about £ 1,000, according to the BBC.
人们能够买得起了,因为价格降下来了,故选B。
【小题3】细节理解题。根据it may bring about certain problems举例说明它的普遍性,故选C。
【小题4】标题归纳题。根据全文来看3D印刷机能接触到的领域很广，故选A。
考点：科普类短文阅读。
点评：做标题归纳题时还要遵循三个原则，即注意题的醒目性、概括性和针对性。醒目性——我们所判断的标题如果放在文章的最前面，应该能使读者一看到标题就对其内容发生兴趣，即，吸引读者的眼球；概括性——指标题应最大限度地覆盖全文，囊括文章的主要内容，体现文章的主题；针对性——我们所选的标题不能偏题，必须指向具体文意，因此也应具备强烈的针对性。
SEE a cell phone cover that you like on Taobao? Forget about placing an order, paying the bill online and waiting for days for it to be delivered to you. In the near future, you'll be able to get it in minutes just by hitting "print" on your computer.
You might find it hard to believe that you could actually "print" an object like you would a picture. But it is not that hard to understand how it would work. Just as a traditional printer sprays (喷) ink onto paper line by line, modern 3-D printers spread material onto a surface layer by layer, from the bottom to the top, gradually building up a shape.
Instead of ink, the materials the 3-D printer uses are mainly plastic, resin (树脂)and certain metals. The thinner each layer is --- from a millimeter to less than the width of a hair --- the smoother and finer the object will be.
This may sound like a completely new technology, but the truth is that 3-D printing has been around since the late 1980s. Back then, it was barely affordable for most people, so few knew about it.
Last year, though, saw a big change in the 3-D printing industry--- printers became much cheaper. For example, 10 years ago a desktop 3-D printer might have cost £20,000 (200,000 yuan), while now they cost only about £ 1,000, according to the BBC.
Taken out of the factory and introduced to more diverse and common uses, 3-D printing can create just about anything you can think of ---flutes (笛子), bikinis, jewelry, aircraft parts and even human organs. In fact, scientists from Cornell University in New York have just made an artificial ear using a 3-D printer, according to Science Daily. The fake ear looks and acts exactly like a natural one.
However, as 3-D printing becomes more commonplace, it may bring about certain problems --- such as piracy. "Once you can download a coffee maker, or print out a new set of kitchen utensils (餐具) on your personal 3-D printer, who will visit a retail (零售的) store again?" an expert in 3-D printing told Forbes News. Even more frightening, what if anyone in the world could use a 3-D printer to print out a fully functioning gun?
【小题1】According to the article, in the future, the 3-D printing technology will ___.
| A．enable people to make better purchases online |
| B．be applied as widely in our daily lives as computers |
| C．change the way we make many products |
| D．shorten the time it takes for people to get what they buy online |
| A．The 3-D printing technology was taken out ofthe factory. |
| B．The 3-D printer became more affordable forconsumers. |
| C．The 3-D printer was used for medical treatmentfor the first time. |
| D．3-D printing technology began to be used invarious fields. |
| A．By analyzing a cause and an effect. | B．By making comparisons. |
| C．By giving examples. | D．By presenting research findings. |
| A．Printing out everything | B．Technology in the future |
| C．Online shopping disappearing | D．Great demand for 3-D printers |
I passed all the other courses that I took at my university, but I could have never passed botany. This was because all botany students had to spend several hours a week in a laboratory looking through a microscope at plant cells, and I could never once see a cell through a microscope. This used to make my professor angry. He would wander around the laboratory pleased with the progress all the students were making in drawing the structure of flower cells, until he came to me. I would just be standing there. “I can’t see anything,”I would say. He would begin patiently enough, explaining how anybody can see through a microscope, but he would always end up angrily, claiming that I could too see through a microscope but just pretended that I couldn’t. “It takes away from the beauty of flowers anyway.”I used to tell him.“We are not concerned with beauty in this course,”he would say.“We are concerned with the structure of flowers.” “Well,” I’d say.“I can’t see anything.” “Try it just once again,” he’d say, and I would put my eye to the microscope and see nothing at all, except now and again something unclear and milky. “You were supposed to see a clear, moving plant cells shaped like clocks.” “I see what looks like a lot of milk.” I would tell him. This, he claimed, was the result of my not having adjusted the microscope properly, so he would readjust it for me, or rather, for himself. And I would look again and see milk.
I failed to pass botany that year, and had to wait a year and try again, or I couldn’t graduate. The next term the same professor was eager to explain cell-structure again to his classes. “Well,”he said to me, happily, “we’re going to see cells this time, aren’t we?” “Yes,sir,” I said. Students to the right of me and to the left of me and in front of me were seeing cells; what’s more, they were . Of course, I didn’t see anything.
So the professor and I tried with every adjustment of the microscope known to man. With only once did I see anything but blackness or the familiar milk, and that time I saw, to my pleasure and amazement, something like stars. These I hurriedly drew. The professor, noting my activity, came to me, a smile on his lips and his eyebrows high in hope. He looked at my cell drawing. “What’s that?”he asked.“That’s what I saw,”I said.“You didn’t, you didn’t, you didn’t!”he screamed, losing control of himself immediately, and he bent over and looked into the microscope. He raised his head suddenly. “That’s your eye!”he shouted.“You’ve adjusted the microscope so that it reflects!You’re drawn your eye!”
【小题1】Why couldn’t the writer see the flower cells through the microscope? .
| A．Because he had poor eyesight |
| B．Because the microscope didn’t work properly |
| C．Because he was not able to adjust the microscope properly |
| D．Because he was just playing jokes on his professor by pretending not to have seen it |
| A．His professor expected him to have seen the cells and drawn the picture of them |
| B．His professor hoped he could perform his task with attention |
| C．His professor wished him to learn how to draw pictures |
| D．His professor looked forward to seeing all his students finish their drawings |
| A．Real stars | B．His own eye |
| C．Something unknown | D．Milk |
| A．Realistic | B．Romantic | C．Serious | D．Humorous |